A Guide to Scuba Regulators

Selecting a regulator is a crucial component when you are investing in your own scuba gear. Also known as regs, regulators are absolutely the lifeline of scuba enthusiasts. They link you to your air tank, giving you access to the air stored in it. So when buying your own gear, it is necessary to select the appropriate scuba regulator and properly set it up according to your specifications. This web link should be able to answer your additional questions.

In most cases, there is no need to be overly concerned about the safety of the reg. Nowadays, practically all diving regulators in the market, especially those manufactured by the leading brands, adhere to the strict standards on safety and performance. So do not be fooled by the marketing blurb that the more costly a reg is, the safer it is to use.

All regs are safe to use for just about all sorts of diving. When selecting your reg, you do not have to factor in the water temperature when diving in tropical waters. But if it is cooler water or even chilled water you want to dive in, take into account if your reg can handle the cold temperature. If cold water is running around the regulator, it may cause the reg to start freeflowing. It doesn't even have to be icy water. Plunging in waters at 50?F (10?C) or lower is nippy to beget problems.

If you want to try cooler waters from time to time, make certain that the reg you choose is assembled and tested to operate in cold water. The good news is that there are more regulators constructed for cold water use in the market, and they are not as pricey as when they first came out.

Mounting a dive regulator is the way you fastened your regulator to your tank and it can be done in two ways. Mounting over and around the tank valve is called the Yoke which is the most familiar and predominant way of mounting. Because it is by far the most typical mount, the Yoke can be found everywhere. Chances are it is the kind of mount you used in your scuba class. Go to http://www.bestscubaregulators.com/ to learn more.

The other kind is the DIN which is short for Deutsche Industri Norm. It is bolted directly into the valve itself which distinguishes it from the Yoke. The advantages of such a setup is that the DIN is more sleek, lessens the danger of entanglement, and is more solidly attached to the tank. Yoke and DIN users always debate the merits of their tanks but tech divers prefer the latter. Almost all tanks can take in both DIN and Yoke mounts.